[general] servername = Asterisk protocolversion = 5 keepalive = 30 ; IMPORTANT: 5secs. lead to trouble with 7960 context = internal dateFormat = M/D/YA ; M-D-Y in any order (5 chars max) bindaddr = XXX.XXX.XXX.XXX ; replace with the ip address of the asterisk server port = 2000 ; listen on port 2000 (Skinny, default) debug = 0 accountcode = skinny ; accountcode to ease billing disallow = all allow = ulaw allow = gsm allow = g726 callwaiting_tone = 0x2d ; sets to 0 to disable the callwaiting tone language = en ; Default language setting this setting also sets the voicemailbox language echocancel = on ; sets the phone echocancel for all devices silencesuppression = off ; sets the silence suppression for all devices cfwdall = off ; activate the callforward ALL stuff and softkeys cfwdbusy = off ; activate the callforward BUSY stuff and softkeys private = on ; permit the private function softkey dnd = on ; turn on the dnd softkey for all devices. Valid values are "off", "on" (busy signal), "reject" (busy signal), "silent" (ringer = silent) mwilamp = on mwioncall = on ; Set the MWI on call lamp signal on phone pickupgroup = 1 tos = 0x68 rtptos = 184 firstdigittimeout = 10 digittimeout = 5 [devices] type = 7940 description = Office tzoffset = 0 autologin = 210 device => SEPXXXXXXXXXXXX type = 7912 description = Another Office tzoffset = 0 autologin = 220 device => SEPXXXXXXXXXXXX [lines] id = 210 ; future use pin = 1234 ; future use label = Ext 210 ; button line label (7960, 7970, 7940, 7920) description = Office ; top diplay description context = internal incominglimit = 4 ; more than 1 incoming call = call waiting secondary_dialtone_digits = 9 ; digits for the secondary dialtone (max 9 digits) secondary_dialtone_tone = 0x21 ; outside dialtone mailbox = 210 ; voicemail.conf (syntax: vmbox@context:folder) vmnum = 650 ; speeddial for voicemail administration, just a number to dial trnsfvm = 660 pickupgroup = 1 cid_name = Office ; caller id name cid_num = 210 line => 210 id = 220 ; future use pin = 1234 ; future use label = Ext 220 ; button line label (7960, 7970, 7940, 7920) description = Another Office ; top diplay description context = internal incominglimit = 4 ; more than 1 incoming call = call waiting secondary_dialtone_digits = 9 ; digits for the secondary dialtone (max 9 digits) secondary_dialtone_tone = 0x21 ; outside dialtone mailbox = 220 ; voicemail.conf (syntax: vmbox@context:folder) vmnum = 650 ; speeddial for voicemail administration, just a number to dial trnsfvm = 660 pickupgroup = 1 cid_name = Another Office ; caller id name cid_num = 220 line => 220